Never Ending Card

Never Ending Card

It's been a very long time since I've made a "never-ending card". I have an old tutorial that has odd scoring measurements... 17 years ago

It's been a very long time since I've made a "never-ending card". I have an old tutorial that has odd scoring measurements like 1 1/16" and 3 3/16" so I decided to revise it. With these new measurements, it is much easier to use the Scor-Pal for this project!

This has also been called a "four-in-one card". Hope this tutorial inspires you to make your own!

NEVER ENDING CARD

Supplies:
4" x 10" piece of solid cardstock (I used Bazzill)
Scor-Pal
Adhesive
Paper trimmer or craft knife
Stamps (I used Always Remember from TAC)
Ink
Other flat embellishments (optional)
Scrap pieces of patterned paper (I used Angelee from TAC):
(4) 2 1/4" x 3/4"
(8) 2 1/4" x 1 3/4"
(8) 1" x 3/4"
(4) 1" x 1 3/4"

Directions:

Step 1: (see red lines) Click to enlarge if you need to.
______________________________________________

Step 2 (see blue lines) Click to enlarge if you need to.
______________________________________________

Step 3: (see green lines) Turn cardstock so the short side is at the top upper left corner of the Scor-Pal. Score at 1" and 3" from the top edge down to the first score line ONLY. Turn cardstock around and do the same thing at the other end.
______________________________________________

Step 4: (see black lines) Using a paper trimmer or craft knife, make a cut in the center (2" each side) from the 2 1/2" score line down to the 7 1/2" score line.
______________________________________________

Step 5: Now cut on the 2 1/2" score line from the 1" line down to the 3" line. Do the same thing on the 7 1/2" score line.


Step 6: Place adhesive in the four places designated by gray shading in the diagram. Fold the left end up on the 2 1/2" score line, and the right end on the 7 1/2" score line, so they meet in the middle. They will be adhered to the back layer at four places.
______________________________________________

Step 7: Adhere scrap pieces of patterned paper in place. Stamp and embellish as desired.



The picture above shows the beginning of card (gate-fold style).

Open and fold sides to the back to get the next view:


Now, flip top up and bottom down to get this view:


Next, open the sides and fold to the back again and you'll have the next view:


To go back to the beginning, flip the top up and bottom down. It "NEVER ENDS"!


Let me know if you make one! Have a great day, Tootles!


A note from Julie
Vicki I love this ~ Thank you!!! To see more brilliant creations from Vicki Click HERE and if you use Vicki's Tutorial to make your own 'never ending card' please let us have a link so that we can come and see :)